PRODUTOS

K3/100 Transceptor HF 100W (semi-novo montado)

Elecraft

  • K3/100 Transceptor HF 100W (semi-novo montado)
R$ 15.225,00
á vista R$ 14.463,75
Disponibilidade: Disponível
Calcular frete
Calcule o frete:

Parcelamento com PagSeguro

1x R$ 15.225,00
2x R$ 7.612,50 (sem juros)
3x R$ 5.381,46 (com juros)
4x R$ 4.094,96 (com juros)
5x R$ 3.323,50 (com juros)
6x R$ 2.809,57 (com juros)
7x R$ 2.442,79 (com juros)
8x R$ 2.167,98 (com juros)
9x R$ 1.954,49 (com juros)
10x R$ 1.783,92 (com juros)
11x R$ 1.644,57 (com juros)
12x R$ 1.528,62 (com juros)
13x R$ 1.430,68 (com juros)
14x R$ 1.346,89 (com juros)
15x R$ 1.274,42 (com juros)
16x R$ 1.211,15 (com juros)
17x R$ 1.155,45 (com juros)
18x R$ 1.106,05 (com juros)
Juros de 2.99% ao mês - *Parcelamento em 18x disponível para algumas bandeiras de cartão, de acordo com a política do Pagseguro

K3/100 Transceptor HF 100W (semi-novo montado)

 

Equipamento montado por Erwin, PY2QI.

Apenas uma peça, com pouco uso, em perfeito estado de funcionamento e sem detalhes.

Opera em todas as faixas de 160 a 6 metros em CW, SSB, FM, AM, RTTY.

Acompanha cabo de alimentação e manual de montagem e uso.

Assista em nosso canal do Youtube a montagem dessa peça do K3/100 - CANAL YOUTUBE DA RADIOHAUS

GENERAL

Frequency Range: Main and Sub Receiver: 500 kHz - 30 MHz, 48-54 MHz. (Reduced sensitivity in region of 8.215 MHz IF. KBPF3 required for general coverage receive/transmit.) Transmitter: Amateur bandsbetween 1.8 and 54 MHz. (Transmit limits vary by country.) MARS TX mod available.

Tuning Step Sizes: 1, 10, 20, and 50 Hz; per-mode coarse tuning of 1, 2.5, 5, 10 kHz, or user-selected rate. Direct keypad frequency entry in either MHz or kHz.

Memories: 100 general purpose, plus 4 per-band scratchpad memories (M1-M4).

Frequency Stability: +/- 5 ppm 0-50 C TCXO standard; +/- 0.5 ppm TCXO optional.

Antenna Impedance: 50 ohms nominal.

Antenna Connectors: SO-239 (2nd SO-239 antenna jack supplied with KAT3 ATU). BNC for RX antenna in/out (KXV3 Option).

Modes: USB, LSB, AM, FM, CW, and DATA. In DATA mode: Direct FSK, AFSK, or PSK31. Built in PSK31, RTTY, and CW text decode/display.

VFOs: Dual VFOs (A and B) with separate weighted tuning knobs.

Remote Control Port: EIA-232 standard DE-9F plus USB adapter option. Full control of all radio functions.

Audio I/O: PC line-level isolated TX/RX audio interface (stereo outputs); front and rear stereo headphone jacks; stereo speaker jacks.

Low Level Transverter Interface: 0 dBm typ.; BNC connectors (KXV3 Option).

Buffered IF output: BNC connector (KXV3 Option).

Other I/O: Key/Keyer/Computer, Paddle, PTT In, and KEY Out. Band information output via binary interface and AUXBUS on ACC connector.

Supply Voltage/current: 13.8 V nominal during TX. (11 V min, 15 V max). 17-22 Amps typical in TX (100W). 0.9A minimum RX.

Weight: 8.5 lbs max. (K3/100 with ATU and Sub Rx installed.)

 

RECEIVERS

 

Sensitivity: -136 dBm or better (typical), 500Hz b/w.

IMD3 Dynamic Range (400 Hz 8-pole filter): >100 dB typical at 5, 10, and 20 kHz spacing

Blocking Dynamic Range (400 Hz 8-pole filter): 140 dB typical at 5, 10, and 20 kHz spacing

Image Rejection: > 70 dB

IF Rejection: > 70 dB

S-Meter: Nominally S9 = 50 uV, preamp on; user adjustable.

Noise Blanker: Adjustable, multi-threshold, multi-width hardware blanker plus DSP blanker.

8-Band RX graphic EQ: +/- 16 dB/octave.

IF Shift/Width & Lo/High Cut adjustable filtering.

 

TRANSMITTER

 

Output Power: 200 mW –100 W, ALC controlled (Reduced power on AM.)

Duty Cycle: CW and SSB modes 100%. RTTY/data  easily handles 10-min. 100W key-down at 25 C ambient.

True RF Speech Processor: Adjustable compression and level. 

TX Audio Adjustable Noise Gate to get rid of background noise and give your signal more presence.

8-Band TX audio graphic EQ: +/- 16 dB/octave. Customize the K3 for your voice and microphone.

SSB TX Bandwidth: 4 kHz max. (> 2.8 kHz requires 6 kHz AM filter and ESSB TX EQ adjustment).

TX speech Monitor: Monitors after DSP filtering and processing.

VOX: DSP-controlled, adjustable threshold, delay. and anti-VOX.

Full and Semi CW Break-In: Adjustable delay. Silent Diode T/R Switching.

Adjustable CW Rise/Fall Time: 5 ms.

Key Out to RF Out Delay: Adjustable up to 20 ms.

SSB Carrier Suppression: > 50 dB.

Harmonic and Spurious: > 50 dB below Carrier (100W) typical.

CW Offset/Sidetone: 400-800 Hz, adjustable in 10Hz steps.

Mic: Front 8 pin microphone connector, rear 3.5 mm microphone connector, wide mic 

GENERAL

Frequency Range: Main and Sub Receiver: 500 kHz - 30 MHz, 48-54 MHz. (Reduced sensitivity in region of 8.215 MHz IF. KBPF3 required for general coverage receive/transmit.) Transmitter: Amateur bandsbetween 1.8 and 54 MHz. (Transmit limits vary by country.) MARS TX mod available.

Tuning Step Sizes: 1, 10, 20, and 50 Hz; per-mode coarse tuning of 1, 2.5, 5, 10 kHz, or user-selected rate. Direct keypad frequency entry in either MHz or kHz.

Memories: 100 general purpose, plus 4 per-band scratchpad memories (M1-M4).

Frequency Stability: +/- 5 ppm 0-50 C TCXO standard; +/- 0.5 ppm TCXO optional.

Antenna Impedance: 50 ohms nominal.

Antenna Connectors: SO-239 (2nd SO-239 antenna jack supplied with KAT3 ATU). BNC for RX antenna in/out (KXV3 Option).

Modes: USB, LSB, AM, FM, CW, and DATA. In DATA mode: Direct FSK, AFSK, or PSK31. Built in PSK31, RTTY, and CW text decode/display.

VFOs: Dual VFOs (A and B) with separate weighted tuning knobs.

Remote Control Port: EIA-232 standard DE-9F plus USB adapter option. Full control of all radio functions.

Audio I/O: PC line-level isolated TX/RX audio interface (stereo outputs); front and rear stereo headphone jacks; stereo speaker jacks.

Low Level Transverter Interface: 0 dBm typ.; BNC connectors (KXV3 Option).

Buffered IF output: BNC connector (KXV3 Option).

Other I/O: Key/Keyer/Computer, Paddle, PTT In, and KEY Out. Band information output via binary interface and AUXBUS on ACC connector.

Supply Voltage/current: 13.8 V nominal during TX. (11 V min, 15 V max). 17-22 Amps typical in TX (100W). 0.9A minimum RX.

Weight: 8.5 lbs max. (K3/100 with ATU and Sub Rx installed.)

 

RECEIVERS

 

Sensitivity: -136 dBm or better (typical), 500Hz b/w.

IMD3 Dynamic Range (400 Hz 8-pole filter): >100 dB typical at 5, 10, and 20 kHz spacing

Blocking Dynamic Range (400 Hz 8-pole filter): 140 dB typical at 5, 10, and 20 kHz spacing

Image Rejection: > 70 dB

IF Rejection: > 70 dB

S-Meter: Nominally S9 = 50 uV, preamp on; user adjustable.

Noise Blanker: Adjustable, multi-threshold, multi-width hardware blanker plus DSP blanker.

8-Band RX graphic EQ: +/- 16 dB/octave.

IF Shift/Width & Lo/High Cut adjustable filtering.

 

TRANSMITTER

 

Output Power: 200 mW –100 W, ALC controlled (Reduced power on AM.)

Duty Cycle: CW and SSB modes 100%. RTTY/data  easily handles 10-min. 100W key-down at 25 C ambient.

True RF Speech Processor: Adjustable compression and level. 

TX Audio Adjustable Noise Gate to get rid of background noise and give your signal more presence.

8-Band TX audio graphic EQ: +/- 16 dB/octave. Customize the K3 for your voice and microphone.

SSB TX Bandwidth: 4 kHz max. (> 2.8 kHz requires 6 kHz AM filter and ESSB TX EQ adjustment).

TX speech Monitor: Monitors after DSP filtering and processing.

VOX: DSP-controlled, adjustable threshold, delay. and anti-VOX.

Full and Semi CW Break-In: Adjustable delay. Silent Diode T/R Switching.

Adjustable CW Rise/Fall Time: 5 ms.

Key Out to RF Out Delay: Adjustable up to 20 ms.

SSB Carrier Suppression: > 50 dB.

Harmonic and Spurious: > 50 dB below Carrier (100W) typical.

CW Offset/Sidetone: 400-800 Hz, adjustable in 10Hz steps.

Mic: Front 8 pin microphone connector, rear 3.5 mm microphone connector, wide mic 

Produtos relacionados

Cadastre-se e receba nossas melhores promoções:
Banner Anatel
PRO
AMERICA