PRODUTOS

A-1015-R VHF repeater amplifier, 3-4W in-110W out,50-54 MHz

Mirage

  • A-1015-R VHF repeater amplifier, 3-4W in-110W out,50-54 MHz
Disponibilidade: Indisponível

 Em breve traducão em Português (BR).

 

 

11 models to choose from - continuous duty all mode FM/SSB/CW repeater amplifiers for 6, 2, 220 MHz, 450 MHz, and ATV service. 

50, 144 and 220 MHz Models

FEATURES:

Cool Running - A10” high by 19” wide full finned rack-mounted heatsink keeps the transistor temperatures low for long life. Chassis cover is perforated so air convection will keep the circuit board area cool.

Dual Protection - The amplifiers have two temperature sensors; one on the heatsink and one on the circuit board. If conditions cause either to overheat, the amplifier will shut off until it cools down to a safe temperature. 

Bypass Mode - These models will feed the exciter output straight through to the antenna in an over-temperature condition. 

The bypass mode can also be remotely selected by proper interfacing to the repeater controller. Either a relay contact or a TTLlogic can be used to select the bypass mode or amplified mode of operation.

Reduced Relay Wear - The amps have a selectable long release time (adjustable up to 5 seconds) for the RF change-over relay. This prevents unnecessary action during repeater operation. 

On-site Control - The bypass mode and relay release time can be selected with built-in switches. The operational MIRAGE RC-1 remote control box can be used to switch these functions up to 18 feet away from the amplifier. 

Warranty - Mirage repeater amplifiers are guaranteed for one year against failure due to defective workmanship or materials.

Specifications:
Input Power Range: .25-5.
I (MAX) at 13.8 Volts: 20.
Weight in Pounds: 12.
Size WxHxD inches: 10x19 Heatsync.
PreAmp Gain: NO.

Typical Power Out for Watts in:
.25: 6.
0.5: 10.
1: 22.
2: 42.
3: 63.
5: 98.

 Em breve traducão em Português (BR).

 

 

11 models to choose from - continuous duty all mode FM/SSB/CW repeater amplifiers for 6, 2, 220 MHz, 450 MHz, and ATV service. 

50, 144 and 220 MHz Models

FEATURES:

Cool Running - A10” high by 19” wide full finned rack-mounted heatsink keeps the transistor temperatures low for long life. Chassis cover is perforated so air convection will keep the circuit board area cool.

Dual Protection - The amplifiers have two temperature sensors; one on the heatsink and one on the circuit board. If conditions cause either to overheat, the amplifier will shut off until it cools down to a safe temperature. 

Bypass Mode - These models will feed the exciter output straight through to the antenna in an over-temperature condition. 

The bypass mode can also be remotely selected by proper interfacing to the repeater controller. Either a relay contact or a TTLlogic can be used to select the bypass mode or amplified mode of operation.

Reduced Relay Wear - The amps have a selectable long release time (adjustable up to 5 seconds) for the RF change-over relay. This prevents unnecessary action during repeater operation. 

On-site Control - The bypass mode and relay release time can be selected with built-in switches. The operational MIRAGE RC-1 remote control box can be used to switch these functions up to 18 feet away from the amplifier. 

Warranty - Mirage repeater amplifiers are guaranteed for one year against failure due to defective workmanship or materials.

Specifications:
Input Power Range: .25-5.
I (MAX) at 13.8 Volts: 20.
Weight in Pounds: 12.
Size WxHxD inches: 10x19 Heatsync.
PreAmp Gain: NO.

Typical Power Out for Watts in:
.25: 6.
0.5: 10.
1: 22.
2: 42.
3: 63.
5: 98.

Produtos relacionados

Cadastre-se e receba nossas melhores promoções:
AMERICA
PRO
Compras Governamentais